OPTIMIZE THE DURABILITY AND EFFICIENCY OF NEW SHOCK ABSORBERS
ALWAYS INSTALL NEW PROTECTION KITS WITH NEW SHOCKS & STRUTS
Installing new shock absorbers & struts can bring significant benefits to any vehicle, including increased handling precision, improved comfort, greater stability and reduced braking distance. But it is important to think about protecting the shocks themselves. In fact, the shock & strut replacement job is not complete without the installation of a new Protection Kit for each new shock & strut.
This article will focus on the importance of Protection Kits, including their purpose, benefits and the potential risks that can come with re-using old kit components.
WHAT IS A PROTECTION KIT?
A Protection Kit features two important components for each new shock & strut: a robust dirt shield and a compression bumper. The dirt shield helps extend shock life by shielding the shock & strut’s piston rod from corrosion and physical damage caused by dirt, water, rocks and other debris. The compression bumper plays an equally important role controlling and limiting roll, pitch and dive movements of the vehicle when turning, accelerating or braking. At the same time, Protection Kits play an important role preventing mechanical damage of the strut during extreme spring compressions such as when the vehicle hits a deep, a road object, a speed limiter or is turning on a closed curve at high speed.
DIRT SHIELD
The Protection Kit’s dirt shield is designed to protect the piston rod and internal oil seal from corrosion and damage that can occur in everyday driving situations. Constructed from a high-strength thermoplastic polyurethane elastomer, this shield helps protect the shock’s & strut’s smooth, chrome-finished piston rod from corrosive elements found on every road – dirt, water, salt, small rocks, hot asphalt and other debris. An unprotected piston rod can quickly become scratched and pitted. When this occurs, the rod’s finish can abrade the shock & strut’s internal oil seal, eventually leading to a loss of the oil that is used to provide the shock’s damping force.
COMPRESSION BUMPER
The compression bumper is made from high-quality, closed cell, microcellular polyurethane. This bumper is placed at the top of the piston rod, above the dirt shield. Its primary purpose is to prevent extreme vertical movement of the piston rod during the strut’s compression stroke. In extreme conditions, such as when the vehicle hits a curb or extremely deep hold, the resulting suspension movement can cause the shock to violently compress. When this occurs, the compression bumper can protect the strut from mechanical damage by absorbing much of the resulting inertial force.
The compression bumper also helps limiting a shock & strut’s stroke movement, providing an extra measure of stability around curves. A worn-out compression bumper’s stroke-limiting ability is reduced, meaning the vehicle might not hold the road as well when turning.
Inspection and Replacement
The expected lifespan of a protection kit is approximately 80,000 kilometers (about 50,000 miles). To ensure optimal performance of the shock absorbers and struts, it is recommended to conduct thorough inspections of the components of the shock absorbers and their protection kits every 20,000 kilometers (about 12,000 miles) and promptly replace the protection kit if any damage is detected.
It's important to note that reusing old protection kits for installing new shock absorbers or struts is never advisable. Old kits may have tiny holes, cuts, or other damages that are difficult to detect. Moreover, due to material aging and exposure to harsh driving conditions, the dynamic characteristics of old kits may be compromised.